Super Ringmaster R/C Kit 

All the fun of a Super Ringmaster with no strings attached

Super Ringmaster R/C

The Super Ringmaster makes a great R/C flyer for the intermediate or advanced pilot. The R/C kit contains structural parts to build either a glow or electric powered model. While the kit does provide control cables, pushrods and mounting hardware servos and electronics are not included. We have provided a list of components that we used in our models. 

Micro-scale models is producing this kit in association with Bob Clauss who was a designer at the former Sterling model co. The symmetrical wing is one of Bob’s original designs. The wing ribs and spars are laser-cut and interlock to make the wing very rugged and easy to assemble. The trailing edges also interlock with the wing ribs. For the builder this means the wing is self squaring and does not have to be built over the full size print. Full size blueprint is included in the kit .

This completely laser-cut kit builds a glow or electric powered flying model. The Super Ringmaster R/C uses a .15 – .29 glow engine or a Park 480 or equivalent electric motor.  ( engine/motor not included in kit )

Features 

The Super Ringmaster kits are packed full of time saving design features. All of the structural pieces in this kit are laser-cut. The Super Ringmasters wing has been designed to be rugged, easy to assemble and balanced. The 3/16" wing spars are laser-cut, numbered and notched to interlock with the laser-cut wing ribs. The trailing edges then interlock with the wing ribs squaring the wing. Leading edges are marked for wing rib location so the wing is kept true.  All opposing wing parts are cut from the same piece of balsa wood to ensure the wing is balanced. Every laser-cut piece in these kits is marked making assembly a snap.

Super Ringmaster R/C
139.95

Super Ringmaster laser cut model kit

Radio Control

Add To Cart

MODEL SPECIFICATIONS

  • Length 29 inches
  • Wingspan 42 inches
  • Wing area 385 square inches
  • Flying weight 31 ounces (electric)
  • Glow or Electric power ( NOT INCLUDED)

THIS KIT INCLUDES THE FOLLOWING:

  • Kit builds a glow or electric powered flying model
  • Parts interlock for fast, easy and rugged construction
  • Selected, contest grade Balsa wood
  • Laser-cut airframe parts including trailing edges and spars
  • Easy to assemble, interlocking, laser-cut wing parts
  • Laser-cut micro-lite plywood bulkheads and servo mounts
  • Laser-cut wing square and 1.5 degree offset gauge  
  • 2 DU-BRO flex cable assemblies for elevator and rudder control
  • 2-56 aileron push rods and DU-BRO E-Z link retainers
  • Control horns
  • Nylon angles for servo mounting
  • Wire landing gear with wheels and collars
  • DU-BRO nylon hinges
  • Complete hardware kit
  • Shaped balsa cowl
  • Decal insignia
  • Full size wing blueprint
  • Easy to follow, illustrated instruction manual
  • MADE IN THE USA

3/4 View

Front View

Top View

Front View

Aileron push rod 

Battery hold down

Battery hatch